Description
DX50 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
$14.32 ea.
Denitool sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The D2040 N00 CF00 DX50 insert has a carbide substrate. It is PVD coated with our DX50 grade. It’s well suited to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
Weight | 0.0044 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | B11S |
LBB | 0.106” (2.70 mm) |
AN | 13.0° |
RE | 0.000” (0.00 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.000” (0.00 mm) |
L | 0.000” (0.00 mm) |
APMX | 0.157” (4.00 mm) |
D1 | 0.000” (0.00 mm) |
HAND | |
IC | 0.000” (0.00 mm) |
EPSR | 90.0° |
IIC | D2040 |
GAN | 5.0° |
S (insert thickness) | 0.185” (4.70 mm) |
Capability | K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |