Description
DP35 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
CPGT 05T102 EN DP35
$21.59 ea.
Denitool CPGT 1.81.20.5 sized positive carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The CPGT 05T102 EN DP35 insert has a carbide substrate. It is PVD coated with our DP35 grade. It’s the best choice to cut in steel. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B10H |
| LBB | 0.031” (0.80 mm) |
| AN | 11.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.008” (0.20 mm) |
| LE | 0.220” (5.60 mm) |
| L | 0.222” (5.65 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 80.0° |
| IIC | CP05T1 |
| GAN | 10.0° |
| S (insert thickness) | 0.078” (1.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa) |
Related products
-
CPGW 05T102 CBN
$91.38 ea. Read moreOut of Stock -
CPGW 05T104 FN DX50
$26.03 ea. Add to cartIn Stock -
CPGW 05T102 FN DX2
$19.38 ea. Read moreOut of Stock
