Description
DP25 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
CPGT 05T102 EN DP25
$19.09 ea.
Denitool CPGT 1.81.20.5 sized positive carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The CPGT 05T102 EN DP25 insert has a carbide substrate. It is PVD coated with our DP25 grade. It’s the best choice to cut in steel. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B10H |
| LBB | 0.031” (0.80 mm) |
| AN | 11.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.008” (0.20 mm) |
| LE | 0.220” (5.60 mm) |
| L | 0.222” (5.65 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 80.0° |
| IIC | CP05T1 |
| GAN | 10.0° |
| S (insert thickness) | 0.078” (1.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa) |
Related products
-
CPGW 05T104 FN DX30
$22.38 ea. Read moreOut of Stock -
CPGW 05T104 PKD
$114.56 ea. Add to cartIn Stock -
CPGW 05T104 FN DX2
$18.02 ea. Add to cartIn Stock
