Description
DS20 Grade
High-end quality for Hard Turning Operations up to 62 HRC in steel with higher carbon content. High thermal stability.
$28.87 ea.
Denitool CDGT 1.2.60.5 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.01” (0.3 mm). The CDGT 040102 FN DS20 insert has a carbide substrate. It is PVD coated with our DS20 grade. It’s well suited to cut hardened steel. Minimum order quantity: 10 pcs.
In stock
High-end quality for Hard Turning Operations up to 62 HRC in steel with higher carbon content. High thermal stability.
Weight | 0.0007 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z20G |
LBB | 0.020” (0.50 mm) |
AN | 15.0° |
RE | 0.008” (0.20 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.057” (1.45 mm) |
L | 0.159” (4.03 mm) |
APMX | 0.012” (0.30 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | CD0401 |
GAN | 20.0° |
S (insert thickness) | 0.039” (1.00 mm) |
Capability | H1 – Hardened Steel (C-Content 0.2% – 0.8% – Hardness < 62 HRC), H2 – Hardened Steel (C-Content > 0.8% – Hardness < 62 HRC) |