Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
CDGT 040101 FN DX20
$22.45 ea.
Denitool CDGT 1.2.60.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.01” (0.2 mm). The CDGT 040101 FN DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s the best choice to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0007 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z20G |
| LBB | 0.020” (0.50 mm) |
| AN | 15.0° |
| RE | 0.004” (0.10 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.054” (1.36 mm) |
| L | 0.159” (4.03 mm) |
| APMX | 0.008” (0.20 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | CD0401 |
| GAN | 20.0° |
| S (insert thickness) | 0.039” (1.00 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
