Description
DS20 Grade
High-end quality for Hard Turning Operations up to 62 HRC in steel with higher carbon content. High thermal stability.
CDGT 040101 FN DS20
$28.87 ea.
Denitool CDGT 1.2.60.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.01” (0.2 mm). The CDGT 040101 FN DS20 insert has a carbide substrate. It is PVD coated with our DS20 grade. It’s well suited to cut hardened steel. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0007 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z20G |
| LBB | 0.020” (0.50 mm) |
| AN | 15.0° |
| RE | 0.004” (0.10 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.054” (1.36 mm) |
| L | 0.159” (4.03 mm) |
| APMX | 0.008” (0.20 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | CD0401 |
| GAN | 20.0° |
| S (insert thickness) | 0.039” (1.00 mm) |
| Capability | H1 – Hardened Steel (C-Content 0.2% – 0.8% – Hardness < 62 HRC), H2 – Hardened Steel (C-Content > 0.8% – Hardness < 62 HRC) |
