Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
$23.37 ea.
Denitool CDGT 1.2.6 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.02” (0.5 mm). The CDGT 040100 FL DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s well suited to cut in steel. It’s well suited to cut in stainless steel. It’s well suited to cut cast iron. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
Weight | 0.0007 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z12G |
LBB | 0.020” (0.50 mm) |
AN | 15.0° |
RE | 0.000” (0.00 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.081” (2.06 mm) |
L | 0.159” (4.03 mm) |
APMX | 0.020” (0.50 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | CD0401 |
GAN | 12.0° |
S (insert thickness) | 0.039” (1.00 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |