Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
CCGT 120402 FN-250 DX30
$21.60 ea.
Denitool CCGT 430.5 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.195” (5 mm). The CCGT 120402 FN-250 DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut in stainless steel. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0154 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | A25S |
| LBB | 0.000” (0.00 mm) |
| AN | 7.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.008” (0.20 mm) |
| LE | 0.508” (12.90 mm) |
| L | 0.508” (12.90 mm) |
| APMX | 0.197” (5.00 mm) |
| D1 | 0.217” (5.50 mm) |
| HAND | |
| IC | 0.500” (12.70 mm) |
| EPSR | 80.0° |
| IIC | CC1204 |
| GAN | 25.0° |
| S (insert thickness) | 0.187” (4.76 mm) |
| Capability | M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
CCGT 120404 FN-250 DX20
$20.62 ea. Read moreOut of Stock -
CCGT 120408 FN-250 DX20
$20.62 ea. Read moreOut of Stock -
CCGT 120404 FN-250 DX30
$21.60 ea. Read moreOut of Stock
