Description
DT355 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
$32.01 ea.
Denitool CCGT 32.50.5 sized positive cermet turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.08” (2 mm). The CCGT 09T302 EN DT355 insert has a cermet substrate. It is PVD coated with our DT355 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. Minimum order quantity: 10 pcs.
In stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | B12H |
LBB | 0.049” (1.25 mm) |
AN | 7.0° |
RE | 0.008” (0.20 mm) |
REN | 0.008” (0.20 mm) |
LE | 0.382” (9.70 mm) |
L | 0.381” (9.67 mm) |
APMX | 0.079” (2.00 mm) |
D1 | 0.173” (4.40 mm) |
HAND | |
IC | 0.375” (9.52 mm) |
EPSR | 80.0° |
IIC | CC09T3 |
GAN | 12.0° |
S (insert thickness) | 0.156” (3.97 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa) |