Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
$14.64 ea.
Denitool CCGT 21.51 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.08” (2 mm). The CCGT 060204 FN-250 DX2 insert has a carbide substrate. It is uncoated. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
Weight | 0.011 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | A25S |
LBB | 0.000” (0.00 mm) |
AN | 7.0° |
RE | 0.016” (0.40 mm) |
REN | 0.016” (0.40 mm) |
LE | 0.252” (6.40 mm) |
L | 0.254” (6.45 mm) |
APMX | 0.079” (2.00 mm) |
D1 | 0.110” (2.80 mm) |
HAND | |
IC | 0.250” (6.35 mm) |
EPSR | 80.0° |
IIC | CC0602 |
GAN | 25.0° |
S (insert thickness) | 0.094” (2.38 mm) |
Capability | N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |