Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
TPHT 16T304 FR DX2
$28.91 ea.
Denitool TPHT 32.51 sized positive carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.315” (8 mm). The TPHT 16T304 FR DX2 insert has a carbide substrate. It is uncoated. It’s the best choice to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0132 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | Z20G |
| LBB | 0.118” (3.00 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.508” (12.90 mm) |
| L | 0.649” (16.49 mm) |
| APMX | 0.315” (8.00 mm) |
| D1 | 0.173” (4.40 mm) |
| HAND | |
| IC | 0.375” (9.52 mm) |
| EPSR | 60.0° |
| IIC | TP16T3 |
| GAN | 20.0° |
| S (insert thickness) | 0.156” (3.97 mm) |
| Capability | N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
TPHW 16T304 FN DX30
$31.13 ea. Add to cartIn Stock -
TPHW 16T304 EN DP25
$29.24 ea. Add to cartIn Stock -
TPHW 16T308 FN DX50
$36.47 ea. Read moreOut of Stock
