Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
TPHT 110208 FL DX20
$27.02 ea.
Denitool TPHT 21.52 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The TPHT 110208 FL DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s well suited to cut in stainless steel. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
This item may take 3-4 weeks to deliver
Additional information
| Weight | 0.0044 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z20G |
| LBB | 0.079” (2.00 mm) |
| AN | 11.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.315” (8.00 mm) |
| L | 0.433” (11.00 mm) |
| APMX | 0.118” (3.00 mm) |
| D1 | 0.110” (2.80 mm) |
| HAND | |
| IC | 0.250” (6.35 mm) |
| EPSR | 60.0° |
| IIC | TP1102 |
| GAN | 20.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
TPHW 110208 EN P25
$20.82 ea. Add to cartIn Stock -
TPHW 110202 EN DP55
$29.98 ea. Add to cartIn Stock -
TPHW 110204 EN DP25
$23.57 ea. Add to cartIn Stock
