Description
DP35 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
TPGT 16T304 EN DP35
$23.74 ea.
Denitool TPGT 32.51 sized positive carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The TPGT 16T304 EN DP35 insert has a carbide substrate. It is PVD coated with our DP35 grade. It’s the best choice to cut in steel. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0132 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B15H |
| LBB | 0.079” (2.00 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.650” (16.50 mm) |
| L | 0.649” (16.49 mm) |
| APMX | 0.157” (4.00 mm) |
| D1 | 0.173” (4.40 mm) |
| HAND | |
| IC | 0.375” (9.52 mm) |
| EPSR | 60.0° |
| IIC | TP16T3 |
| GAN | 15.0° |
| S (insert thickness) | 0.156” (3.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa) |
Related products
-
TPHW 16T308 FN DX30
$31.13 ea. Read moreOut of Stock -
TPHW 16T304 FN DX30
$31.13 ea. Add to cartIn Stock -
TPGT 16T308 EN DP55
$33.15 ea. Read moreOut of Stock
