Description
DX52 Grade
Similar to DX 50 but with additional PLC-antifriction film against the cold-welding tendency. High thermal stability.
$17.33 ea.
Denitool EPGT 1.81.51 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The EPGT 050204 EN DX52 insert has a carbide substrate. It is PVD+PLC coated with our DX52 grade. It’s well suited to cut in steel. It’s well suited to cut in stainless steel. Minimum order quantity: 10 pcs.
In stock
Similar to DX 50 but with additional PLC-antifriction film against the cold-welding tendency. High thermal stability.
Weight | 0.0022 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD+PLC |
CBMD | B12H |
LBB | 0.031” (0.80 mm) |
AN | 11.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.177” (4.50 mm) |
L | 0.227” (5.76 mm) |
APMX | 0.098” (2.50 mm) |
D1 | 0.098” (2.50 mm) |
HAND | |
IC | 0.219” (5.56 mm) |
EPSR | 75.0° |
IIC | EP0502 |
GAN | 12.0° |
S (insert thickness) | 0.094” (2.38 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa) |